Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Solid-Solutions-Group-Navigation Javelin-Group-Navigation Solid-Print-Group-Navigation 3DPRINTUK-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Enterprise-Simulation-Solutions Trimech-Advanced-Manufacturing-Group-Navigation Trimech-Staffing-Solutions-Group-Navigation
With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, staffing and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by the divisions and brands shown here, use the links above to visit the group's websites and learn more.

Inserting Anchor Columns in GrabCAD Print

Adding anchor columns to a 3D printed part with a large, flat base is a great way to help prevent part curling or warpage. Anchor columns of model material adhere directly to the built tray to help secure the part better during the printing process.

Anchor Columns in GrabCAD Print

As more advanced and reliable solutions come to market to offset the percentage of a market owned by traditional manufacturing methods, additive manufacturing is consistently looked at with admiration.

This new technology is currently positioned as a complement to subtractive manufacturing and will continue to do so until certain variables can be tamed with near-flawless accuracy and precision. One step closer to perfection is the addition of anchor columns in GrabCAD Print.

Dealing with 3D printed part issues

Most of the procedural issues such as part curling, or warping, have been addressed with hardware features such as heated build chambers and platens with great success. This is coupled with software solutions that control build parameters based on a known material profile (closed material system), as well as, customizable tool paths. Issues that persist are commonly geometry dependent due to non-uniform heat transfer as a function of variable cross-sectional areas. With the release of the Stratasys F770 large-format FDM 3D printer, which boasts a 39.4 x 24 x 24 in. build chamber, Stratasys has empowered their new and existing user base to print massive complex geometries in tried-and-true thermoplastics such as ABS and ASA.

Part curling, or warping, is the bane of the extrusion 3D printing sector. Parts can quickly fall out of spec if non-uniform heat distribution is not taken into consideration when printing. The result of variable cross-sections, or large flat-bottom surfaces, is curling and warping. To combat this, we can apply “anchor columns” directly to the bottom surface of the part to prevent the part from lifting off the build tray. The columns are constructed out of model material.

This means they will need to be manually removed from the part. Additionally, witness marks will need to be sanded down to achieve the desired surface finish. Prior to the release of GrabCAD Print in June 2021, anchor columns were strictly a feature of the Insight Software available on the F370 and Fortus level machines. Today, anchor columns can now be applied directly to the bottom surface of parts in the GrabCAD Print software.

The addition of the anchor columns feature to GrabCAD Print allows all Stratasys FDM users to access this simple yet print-saving technique with the click of a button.