Material Catalog

  • Material Type

LOCTITE 3D 3172 High Impact by Henkel

LOCTITE 3D 3172 High Impact by Henkel

P3 Photopolymer Durable, tough and impact resistant material, for functional applications that need to perform under stress and high load conditions. Produce functional parts that require high stiffness with a good surface finish and high impact resistance. Attributes...

LOCTITE 3D 3843 High Toughness by Henkel

LOCTITE 3D 3843 High Toughness by Henkel

P3 Photopolymer Great balance of strength, stiffness and toughness, with a stunning matte surface finish. LOCTITE ® 3D 3843 High Toughness by Henkel is a high-strength engineering polymer with good impact resistance and exceptional surface finish. Ideal for a wide...

LOCTITE 3D 3955 FST by Henkel

LOCTITE 3D 3955 FST by Henkel

P3 Photopolymer High performance Halogen-free flame retardant UL94-V0 high modulus photopolymer resin. Printable at 60 °C. LOCTITE® 3D 3955 FST by Henkel is a high-performance, high-modulus product with excellent flexural and tensile physical properties and...

LOCTITE 3D IND402 High Rebound by Henkel

LOCTITE 3D IND402 High Rebound by Henkel

P3 Photopolymer True elastomeric behavior. LOCTITE® 3D IND402 High Rebound by Henkel is a single component elastomer with high resilience and rebound. Capable of maintaining excellent tensile strength and does not require thermal post-processing. It is comparable to...

LOCTITE 3D IND403 High Modulus by Henkel

LOCTITE 3D IND403 High Modulus by Henkel

P3 Photopolymer High-modulus and suitable for low to moderate temperature molds and tools where accuracy, surface finish and durability are required. LOCTITE® 3D IND403 High Modulus by Henkel is a tough, high-temperature material. Ideal for molds and end-use parts...

LOCTITE 3D IND405 Clear

LOCTITE 3D IND405 Clear

P3 Photopolymer Clear photopolymer with a smooth surface finish and good impact resistance. Ideal for mechanical guides, fluid ducts, and microfluidic devices. Also suitable for light pipe and packaging prototyping. LOCTITE® 3D IND405 Clear is a one-part semi-rigid 3D...

LOCTITE 3D MED 412 by Henkel

LOCTITE 3D MED 412 by Henkel

P3 Photopolymer Biocompatible, durable and sterilizable. LOCTITE® 3D MED 412 by Henkel is a medical-grade resin designed as a strong, durable material with excellent elongation, impact and compression strength, to enable manufacture medical parts that require moderate...

LOCTITE 3D MED 413 by Henkel

LOCTITE 3D MED 413 by Henkel

P3 Photopolymer Tough and high accuracy material for medical applications. LOCTITE® 3D MED 413 is a high-performance, high modulus material boasting excellent flexural and tensile physical properties. Stiffness, and toughness make this material ideal for use in a wide...

Stratasys Dura56 by LOCTITE

Stratasys Dura56 by LOCTITE

P3 Photopolymer Developed for Origin® 3D printers, Dura56 is a durable, impact-resistant photopolymer with an exceptional surface finish and a low cost per kg. For functional applications where aesthetics and robustness are critical. Stratasys Dura56 was created by...

Ultracur3D ST45 by BASF

Ultracur3D ST45 by BASF

P3 Photopolymer Reactive urethane photopolymer for tough applications that require a combination of high strength, long-term toughness and impact resistance. Ultracur3D® ST45 by BASF is well suited for high-performance functional parts requiring high accuracy and...