With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, staffing and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by the divisions and brands shown here, use the links above to visit the group's websites and learn more.

x

LOCTITE 3D MED 413 by Henkel

P3 Photopolymer

Tough and high accuracy material for medical applications.

LOCTITE® 3D MED 413 is a high-performance, high modulus material boasting excellent flexural and tensile physical properties. Stiffness, and toughness make this material ideal for use in a wide variety of impact-resistant medical devices. Ideal applications: durable, reusable medical components, orthotics, respirator components.

Medical 3D printing

LOCTITE 3D MED 413 by Henkel Material Profile

Learn more about the benefits of Stratasys Origin One P3 printed parts

A powerful combination of production-grade technology and performance materials.

A transformative 3D printer enabling mass production of end-use parts in a diverse range of high-performance materials. Achieve industry-leading accuracy, consistency, detail and throughput with the P3™ Programmable Photopolymerization technology.

LOCTITE 3D Med 413 medical adapter Medical Device 3D Printing

Main Uses

Ideal applications: durable, reusable medical components, orthotics, respirator components.

Material Features and Applications

Medical-grade certified resin

Biocompatible (ISO 10993-5 and ISO 10993-10 certified)

Parts can function at body temperature

Excellent print accuracy and surface finish

Color: White, Clear

LOCTITE 3D MED 413 by Henkel Mechanical Properties

Tensile bars (type IV) were printed at 100 micron per layer and pulled at 5 mm/minute

ASTM	PROPERTY	XY - ORIENTATION	XZ - ORIENTATION	YZ - ORIENTATION
D638	Young’s Modulus	1943 ± 85 MPa	1940 ± 48 MPa	2043 ± 78 MPa
D638	Ultimate Tensile Strength	62 ± 0.4 MPa	60 ± 0.6 MPa	65 ± 0.4 MPa
D638	Elongation at Yield	5.9 ± 0.2%	5.7 ± 0.1%	5.7 ± 0.1%
D638	Elongation at Break	20.1 ± 3.72%	19.1 ± 4.4%	18.6 ± 4.8%
D256	Izod Impact (Notched)	27 ± 0.2 J/m	24 ± 1.5 J/m	25 ± 2.5 J/m

LOCTITE 3D MED 413 by Henkel Thermal Properties

STANDARD	PROPERT	VALUE
ASTM D648	HDT (0.455 MPa)	73°C
ASTM E1545	Tg (Tan δ peak)	85°C
ASTM E1269-11	Specific Heat Capacity	1.706 J / (g °C)
ISO 11359-2:2021	Coefficient of linear thermal expansion	124 x 10-6 K-1 (Std Dev 3.4)

LOCTITE 3D MED 413 by Henkel Electrical Properties

TEST STANDARD	PROPERTY	VALUE
IEC60250	Dielectric Constant (Tested at 1MHz)	3.39
IEC60250	Dissipation Factor (Tested at 1MHz)	0.026
ASTM D149-20Method A	Dielectric Breakdown Strength	6.61KV/mm (Std Dev 0.21)
IEC62631-3-1:2023	Volume Resistitivity	2.29x1015 Ω • cm
IEC62631-3-1:2023	Surface Resistitivity	5.24x1014 Ω/square

Programmable PhotoPolymerization P3™

Advantages of parts built with a Stratasys Origin P3 Machine

Injection Molding Quality

Programmable PhotoPolymerization P3™ technology, an evolution of digital light processing (DLP) is ushering in a new era in 3D printing: the mass production of functional end-use parts.

P3 software precisely orchestrates light, temperature, pull forces and pneumatics to optimize prints for the best possible results.

With P3, injection molding part quality can be achieved, and a surface finish with incredible accuracy. P3 has a diverse and continuously growing range of high-performance materials.

End-use Part Production

P3 is a combination of several tightly controlled, programmable steps in the printing process. P3 extends DLP printing’s capabilities and supports the next generation of production applications made with photopolymers.

This powerful combination of production-grade technology and performance materials unlocks functional end-use applications in 3D printing with competitive throughput and part cost.

Strong Parts, Fast

P3 orchestrated print process, coupled with advanced light control, maximizes green strength and production speed.

Consistent part quality for parts with large or tiny features with exceptionally smooth surfaces every time.

P3 is built from the ground up, to enable the next generation of photopolymers to withstand the harshest conditions.

3D Print Your Part

Industries we work with

TriMech Advanced Manufacturing is used in a wide variety of industries

Architecture 3D printing

Architectural Design & Construction

Model making
Urban planning
Concepts

Consumer product 3D printing

High Tech & Consumer Products

Aesthetic and function testing
Concepts and prototypes
Sales and marketing models

Medical 3D printing

Dental, Medical & Life Sciences

Anatomical models
Medical devices
Orthopedics
Prosthetics
Surgical planning models

Industrial design 3D printing

Industrial Products, Mold Tool & Die

Jigs, fixtures, and assembly tooling
Injection molding
Silicone molding
Sand and investment casting
Thermoforming

More Materials

P3 DLP Silicone 25A Filter no Gloves

Stratasys P3 Silicone 25A

Stratasys P3 Silicone 25A is a soft, flexible, and durable elastomer that features unique properties versus traditional polymers thanks to its distinct silicone-oxygen backbone.

Loctite 3D IND3380 ESD - p3 dlp esd connector core

Loctite 3D IND3380 ESD

LOCTITE 3D IND3380 ESD is a high-temperature, electrostatic dissipative resin ideal for jigs, fixtures, and electronic manufacturing. Offers 190°C HDT, high stiffness, and chemical resistance.

Hand Xray RadioMatrix PolyJet Medical Material

RadioMatrix

RadioMatrix is a 3D printing material designed to replicate radiopacity under X-ray and CT imaging.

Categorized as 3D Printing Medical P3/DLP