Onulis Post Processing

Discover Onulis post processing machines for automated resin waste 3D printing and 3D printed part curing and washing solutions

Waste Resin Printing & Part Curing

The Onulis range of WRAP (Waste Resin Axial Printing) machines automatically convert UV waste resin (PolyJet, SLA or DLP) into fully cured plastic stock for a variety of uses, and is safe for disposal as standard household waste.

Onulius WRAP Cure machines also provide DLP & P3 part curing / post processing, and a certified machine is available to material manufacturer requirements.

Discover the Onulis solutions in the video below.

Part Post Processing Problems & Requirements

When using DLP technology, parts are only partially cured as printed. The printed parts require a secondary UV exposure to fully cure and adhere to the material manufacturer’s specifications. Onulis has identified the following critical gaps in the UV post-curing systems currently available:

Unwanted Heat Generation – Onulis’ system uses high-powered, focused UV lights, fully curing parts per manufacturer’s specifications without emitting infrared rays that give off uncontrolled heat.
Incomplete UV Part Exposure – Onulis’ unique system architecture simultaneously exposes all sides of a part to UV light.
Manual Intervention Required – Onulis provides fully automatic operation.
Lack of Certification, Auditing, & Corrective Action – Onulis provides a certified solution

Onulis Post Processing Capabilities

Replace costly and cumbersome hazardous resin waste services and DLP / P3 post processing with an in-house solution

Safe disposal of PolyJet, SLA or DLP resin

Through leveraging used or expired resin, operation costs are virtually zero.

Easy to use machines

Advanced operator convenience with enhanced ergonomics and process control make it easy to post process your 3D printed parts.

Traceable DLP / P3 Curing

Each WRAP Cure Certified unit goes through a multi-step calibration, inspection, and documentation process.

Innovative machine design

Simple gravity-driven drip system avoids use of pumps, valves, and hoses, which are susceptible to clogs.

Onulis Post Processing Applications

Solutions for resin waste and part curing

UV Resin Waste Processing

Onulis WRAP machines can automatically convert UV waste resin into fully cured plastic stock for a variety of uses and is safe for disposal as standard household waste.

Using patent-pending WRAP® (Waste Resin Axial Printing) technology, the system is the first technology-driven solution for handling UV waste resin, allowing users to avoid time-consuming homespun curing solutions and expensive hazardous waste outsourcing that can draw unwanted oversight from the EPA.

3D Printing Part Curing

Onulis WRAP Cure machines post-cures DLP / P3 parts at production speeds. Using high-powered UV lamps and a transparent rotating curing table. The Onulis WRAP Cure machined offer automatic and complete part curing.

To ensure that the material manufacturer’s specifications will be met, each Onulis WRAP Cure Certified unit goes through a multi-step calibration, inspection, and documentation process.