The standard for easy and efficient part cleaning
Automated 3D printed part cleaning solution for powder-bed processes, such as Multi Jet Fusion (MJF), Selective Laser Sintering (SLS) and High Speed Sintering (HSS)
Manual cleaning and post processing of 3D printed parts is time consuming and expensive, especially with large volumes of parts. Using the DyeMansion Powershot C allows companies to reduce the time and effort to finish their production parts.
DyeMansion Powershot C Features
Typical Part Cleaning Issues
Due to the poorly uniform irradiation distribution, which is unavoidable with manual cleaning, part damages of various kinds can occur. Damaged parts have to be re-produced, which means additional time and costs.
Pressure Marks
Pressure marks occur, for example, when the operator covers points by holding the parts. This results in uneven cleaning. Pressure marks are often only visible after dyeing.
Powder Residuals
Particularly in the case of parts with complex geometries and pockets with different depths, powder residues often stay during manual cleaning. That can cause an inconsistent colouring.
Burn Marks
Burn marks on parts are caused by too short distance, too long irradiation and too high pressure. Affected parts cannot be colored reproducibly afterwards.
DyeMansion Powershot C Benefits
Automated de-powdering boosts production capacity
With the proprietary PolyShot Cleaning (PSC) a mid-sized build job can be cleaned in only ten minutes or less. The time you need for part cleaning and the personnel in your production can be significantly reduced. This boosts your effectiveness and efficiency.
By investing in automated part cleaning with the Powershot C, up to four manual blasting systems can be easily replaced. PolyShot Cleaning is compatible with all common powder-bed technologies and delivers residue-free parts for brilliant colours.
Gentle part treatment thanks to smart features
The blasting cabinet of our Powershot C is equipped with a rotary basket and is manufactured from stainless steel. Different blasting nozzles and an ionization unit ensure reproducible results.
Couple this with a basket with a soft and replaceable lining protecting the parts from damage during the process. Two simultaneously working blasting nozzles are positioned perpendicular to the rotating basket and the contained parts. The cyclone cleans the blasting media constantly. This configuration guarantees an efficient powder removal.
Automated de-powdering boosts production capacity
With the proprietary PolyShot Cleaning (PSC) a mid-sized build job can be cleaned in only ten minutes or less. The time you need for part cleaning and the personnel in your production can be significantly reduced. This boosts your effectiveness and efficiency.
By investing in automated part cleaning with the Powershot C, up to four manual blasting systems can be easily replaced. PolyShot Cleaning is compatible with all common powder-bed technologies and delivers residue-free parts for brilliant colours.
Plastic or glass blasting media
In addition to industry-standard glass blasting media, the Powershot C can also be used with proprietary plastic blasting media to remove powder gently and efficiently across a wider range of materials and geometries. The proprietary blasting media is compatible with all common powder bed technologies and improves depowdering of challenging materials such as TPU.
DyeMansion Powershot C Explained
DyeMansion Powershot C Specifications
| Feature | Details |
|---|---|
| AUTOMATION | Individual programming, control and monitoring of process parameters via control panel and touch screen |
| PERFORMANCE | |
| Cycle time | Variable from 1 to 40 minutes, typically 3 to 10 minutes |
| Capacity per run | Mid sized build job (e.g. 3/4 of EOS P396 or full HP Jet Fusion 4200/5200) |
| Volume of basket | 100 liters / 26 liters (actual/effective) |
| Dimensions of basket | Ø 600 mm x 450 mm | 23.6 inch x 17.7 inch |
| DIMENSIONS | |
| System (L x W x H) | 1700 mm x 1310 mm x 2030 mm | 66.9 inch x 51.6 inch x 79.9 inch |
| Recommended space requirement | 2500 mm x 2915 mm x 2300 mm | 98.4 inch x 114.8 inch x 90.6 inch in operation (L x W x H) |
| WEIGHT | |
| System | 490kg | 1080lb |
| POWER | |
| Supply | 1kW |
| Requirements | 400V, 50Hz, 16A or 208V, 60Hz, 20A |
| COMPRESSED AIR | |
| Consumption | Minimum: 1.4m3/min at 2.2bar | 50cfm at 32psi Maximum: 1.8m3/min at 5bar | 64cfm at 73psi |
| NOISE EMISSION | |
| Sound level | < 80dB(A) |
Industries we work with
TriMech Advanced Manufacturing is used in a wide variety of industries
Architectural Design & Construction
- Model making
- Urban planning
- Concepts
High Tech & Consumer Products
- Aesthetic and function testing
- Concepts and prototypes
- Sales and marketing models
Dental, Medical & Life Sciences
- Anatomical models
- Medical devices
- Orthopedics
- Prosthetics
- Surgical planning models
Industrial Products, Mold Tool & Die
- Jigs, fixtures, and assembly tooling
- Injection molding
- Silicone molding
- Sand and investment casting
- Thermoforming
More Post Processing Solutions
ORYX scaWaterjet
A water jetting spray booth capable of coarse and fine support material removal during 3D printing post processing.
AMT PostPro SFX Vapor Smoothing System
The AMT PostPro SFX Vapor Smoothing System is a professional desktop vapor smoothing machine for improving the surface finish of 3D printed parts, designed for...
DyeMansion Powerfuse S Series
Green vapor polishing solution to apply an injection molding-like surface finish to 3D printed parts made from PP, PA, TPU, ULTEM & more
