Finish your 3D Printed Parts faster with the RADOR
Meet the specifications for the desired Roughness Average (Ra) to achieve various types of finishes on a wide range of 3D printed materials.
The Surface Finishing machine works with parts created with the following 3D printing technologies: FDM, SLS, SLA, CLIP, PolyJet, Muti Jet Fusion (MJF), and more.
PostProcess RADOR Essential features
PostProcess RADOR Benefits
Fast Cycle Times
The patent-pending automated surface finish vibratory system is exclusively engineered for additive manufactured parts. Designed to meet the specifications for your desired Roughness Average (Ra) to achieve various types of finishes, the surface finishing machine is ideal for all 3D printed materials.
PostProcess solution of patent-pending software, user-friendly hardware, and eco-friendly consumables works collectively to deliver exacting surface finishing on all 3D print materials while increasing the throughput of your production.
Precise Roughness Average for every Part
The Surface Finishing system applies patent-pending technology using Suspended Rotational Force (SRF), which encompasses optimized energy with vertical motion combined with proprietary eco-friendly consumables to achieve the required surface finish on each of your 3D parts. This solution, along with the entire surface finishing line, has been designed with noise-reducing features for low dBa to reduce the noise in your production environment.
Custom Software
The custom-developed software with proprietary Agitation Algorithms is the driver behind ensuring your desired surface finish results while preserving the fine-feature detail of unique geometries.
It precisely controls all variables behind the scenes, including heat, frequency, amplitude, and lubricity, resulting in less breakage. The machine is a “set it and forget it” solution that no other system can offer.
Eco-friendly Media
All of the patent-pending engineered solutions have been developed for high-performance and optimized to use eco-friendly media. PostProcess provide media in 50 pound plastic containers with molded-in handles, for easy unload and storage. The media has been formulated and tested to have the lowest attrition rates in the industry.
PostProcess RADOR Specifications
Software Features
- Intelligent cycle times
- Variable detergent dosing
Hardware Features
- Urethane coated envelope
- Textured powder coated enclosure
- Optimized noise suppression enclosure
- Multi-position, self-supporting hinged lid
- Ease-of-use single button operation
- Casters for easy installation
Size and Weight
- Envelope:
- 21.75″ L × 9″ W × 13″ H (55 cm x 23 cm x 33 cm)
- Volume of parts should not exceed 1/3rd of envelope
- Machine Footprint:
- 54.3” L x 28.3” W x 39.4” H (137.9 cm x 71.82 cm x 100 cm)
- Approx. Weight:
- 640 lbs. empty (290 kg);
- 730 lbs. full (331 kg)
Consumables
- PLM-001-SURF Detergent
- All PostProcess abrasive and polishing media
Electrical
- Voltage: 120V
- Amperage: 15A
- Connector: NEMA 5-15P
Safety Features
- Emergency stop
- Multi-position, self-supporting hinged lid
- Auto power down
- Compliant with all OSHA regulations
Why you need a Surface Finish Solution
3 Advantages of using an automated Surface Finish Solution for 3D printed parts
1. Consistent Results
It is virtually impossible to achieve uniformity on every part with manual finishing. PostProcess automated surface finishing ensures that every part is identical, every time — to your specification with the precise Ra required.
2. Reduced Finishing Time
PostProcess harnesses extensive engineering expertise applied to surface finishing of numerous printed parts in the same batch and at faster speeds than manual processing. Ensuring that post-print finishing never hinders the production runs.
3. Greater Productivity
The PostProcess Surface Finishing machine can work on numerous printed parts simultaneously. Enabling companies to focus on higher-value activities.
Industries we work with
TriMech Advanced Manufacturing is used in a wide variety of industries
Architectural Design & Construction
- Model making
- Urban planning
- Concepts
High Tech & Consumer Products
- Aesthetic and function testing
- Concepts and prototypes
- Sales and marketing models
Dental, Medical & Life Sciences
- Anatomical models
- Medical devices
- Orthopedics
- Prosthetics
- Surgical planning models
Industrial Products, Mold Tool & Die
- Jigs, fixtures, and assembly tooling
- Injection molding
- Silicone molding
- Sand and investment casting
- Thermoforming
More Post Processing Solutions
AMT PostPro DPX Depowdering System
The AMT PostPro DPX is a compact, automated depowdering system, ideal for efficient, safe, and high-quality 3D printing post processing in various industries.
Formlabs Form Cure L V2
The fastest, most consistent large-format part curing unit ever built by Formlabs
Formlabs Form Cure L
Achieve peak dimensional accuracy and maximum mechanical properties for your 3D printed parts with advanced part curing.
