Onulis WRAP Pro

No, the WRAP Pro is fully automatic and will shut down after its set time, or when Disposable Tube is fully printed, whichever comes first. In the event of facility power failure, the machine will automatically shut down.

The zero-cost plastic is ideal for CNC mills and lathes to generate machined prototypes, jigs and fixtures, or simply to prove a new program which saves potential waste of expensive end-use materials. All printed plastic from the WRAP Pro is safe for disposal as standard household waste.

The WRAP Pro is a 3D printer, and not a waste processing machine. It functions in the same way as other 3D printing technologies such as PolyJet, Stereolithography, or DLP, using the same UV light cured resins. Like all 3D printers, the WRAP Pro does not require a TDSF (Treatment, Storage, and Disposal Facilities) permit from the EPA (Environmental Protection Agency). The product it prints is a solid plastic stock material. This material can be used for a wide variety of uses, including low-cost media for CNC machining prototypes, jigs, and fixtures. As the WRAP Pro is a 3D printer, the parts printed are safe to dispose of as standard household waste.

If your waste contains any PolyJet support material, you may notice that your cured plastic stock has a tacky film on its surface. This is caused by mineral oils contained in the support material. Simply spray with a household cleaner and wipe off. Mixing resin prior to printing helps ensure stock consistency.
Can the WRAP Pro be used in

The printer comes with built-in carbon filtration; however, it is intended to be used in a well-ventilated warehouse or factory environment. The WRAP Pro can not be operated in direct or indirect sunlight. If office environment is required, use of the Onulis exhaust adapter is needed for proper ducting. For more information on the exhaust adapter, contact us.

The WRAP Pro is compatible with PolyJet. The WRAP Plus is compatible with PolyJet, SLA, and DLP waste resins. There are three Vat offerings: Low Viscosity Vat, Medium Viscosity Vat, and High Viscosity Vat. It is important to use the correct Vat for your resin. Use of an improper resin will cause damage to your machine. To determine the correct Vat for your resin, use of the Vat Viscosity Testing Tool is required.